1. During transportation, tinplate must be protected from moisture and collisions.

2. When storing tinplate, it is prohibited to place liquid items (such as beverages, boiling water, etc.) on the tinplate.

3. When operating, it is necessary to avoid direct contact between human hands and the tinplate, so gloves must be worn.

4. If it is not used up, the remaining part must be wrapped in wrapping film and stored in a dry place. If possible, it can be stored in a warehouse with a constant temperature and relative humidity below 50%.

5. Rolling is strictly prohibited during the transfer of tinplate.

6. When using an air compressor for feeding, it is necessary to keep the gas dry.

7. The force arm of the feeder must maintain uniform tension.

8. If the stamped finished product cannot be shipped in a short period of time, it should be sealed and stored with a drying agent.